As the maritime industry forges ahead with its efforts to meet the goal of net zero emissions by 2050, IACS continues to provide strong support by facilitating the safe adoption of the technological innovations, zero carbon fuels and alternative energy sources that are fundamental to achieving this ambitious target.
In recent years, ammonia has emerged as one of a number of promising carbon-free fuels due to its high energy density and its ability to be liquefied at ambient temperatures. While ammonia therefore has a significant potential as a marine fuel it also presents safety challenges as it is highly toxic to human and aquatic life and it is therefore imperative to address the permissible limits to human exposure in ensuring the safety of onboard personnel.
In light of this and with the aim of guiding the industry in its development of early projects using Ammonia as fuel, IACS has developed a Unified Requirement (URH1) covering the release of ammonia from the onboard systems for bunkering, storing, preparing and using ammonia as fuel.
IACS URH1 aligns with the Recommendations from U.S. National Institute for Occupational Safety and Health (NIOSH) and establishes that an Ammonia concentration of 300 ppm or more is immediately dangerous, and a concentration of 25 ppm or more is dangerous if the exposure is longer than 8 hours. Additionally, it requires the system dealing with ammonia to be designed so as to prevent a direct release of ammonia to the atmosphere during normal operation and also, when possible, during any reasonably foreseeable abnormal scenario.
In situations where a direct release is unavoidable under either a normal or abnormal scenario (such as the activation of a tank pressure relief valve), the points where ammonia is expected to be released are required to be identified by the designer in a risk assessment and to be listed in the ship design documentation. The concentration resulting from such releases must not exceed a safe concentration (25 ppm) at locations of the ship accessible to the crew and this is to be demonstrated through gas dispersion analysis. This requirement is expected to result in the establishment of “toxic areas” (similar to hazardous areas on tankers) with access restrictions and other precautions, such as the absence of air intakes in that area.
URH1 further requires the point at which ammonia is released to the atmosphere, (e.g. outlet of vent mast) to be provided with audible and visual alarms, which are to be activated when the discharged gas has an ammonia concentration of 300 ppm or more, to warn people to promptly leave the area and seek refuge.
Gas dispersion analyses are required to be carried out for abnormal and emergency scenarios identified by way of a risk assessment. Depending on the results of these analyses, measures will have to be taken to prevent the crew onboard from being exposed to dangerous concentrations of ammonia. The spaces where all reasonably foreseeable ammonia leaks may occur (e.g. secondary enclosure, fuel preparation room), even if not normally manned, are to be monitored and the source of the release should be shut down when a concentration exceeding 300 ppm is detected.
In other work relating to the use of Ammonia as a fuel, IACS is also working on Requirements for ammonia treatment systems (equipment intended to reduce the concentration and/or quantity of released ammonia), and Requirements for Gas dispersion analysis.
Other safe decarbonisation-related work underway in IACS includes developing Requirements for the selection and testing of materials and equipment, including portable tanks, for the use of Hydrogen as fuel, and Requirements on electrical energy storage systems, including a Type Approval standard for Lithium-based batteries.
Commenting on the publication of URH1, IACS Secretary General, Mr. Robert Ashdown said ‘URH1 on the control of ammonia releases on ammonia fuelled vessels is a first, but significant, step in providing industry with enhanced levels of assurance for this new fuel type and will be supplemented with further complementary guidance in due course. This work, together with the other work-streams underway within our Safe Decarbonisation Panel, demonstrates IACS’ strong commitment to ensuring that safety remains at the forefront of the maritime industry’s efforts to meet its decarbonisation targets.’
Contact: Robert Ashdown, IACS Secretary General
E: robertashdown@iacs.org.uk T: +44 (0) 20 7976 0660
International Association of Classification Societies
Permanent Secretariat 4 Matthew Parker Street, London, England SW1H 9NP
T: +44 (0)20 7976 0660
Notes to Editors:
- Dedicated to safe ships and clean seas, the International Association of Classification Societies (IACS) makes a unique contribution to maritime safety and regulation through technical support, compliance verification and research and development. More than 90% of the world’s cargo carrying tonnage is covered by the classification design, construction and through-life compliance Rules and standards set by the twelve Member Societies of IACS.
- More information about IACS can be found by visiting iacs.org.uk and in our Annual Review available online at here